Search:

Browse our Product Line


Featured Product Lines

View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > Carbide Cutting Tools > High Performance Carbide End Mills > 2 Flute High Performance End Mills  
 

2 Flute High Performance End Mills


Click on a Product to view details.

Alumastar® Coated-142M, 143M

2 & 3 Flute End Mills - 41° and 38° - ALUMASTAR® Coated

(110)
  • Solid submicron grain carbide end mill - center cutting
  • Specific coating engineered to repel aluminum
  • Engineered to run at 750-2500 SFM (225-750 M/Min.)
  • High velocity - high metal removal rate
  • Need to use properly balanced holders
  • Holds perpendicularity
  • Flats can be added within 48 hours

    Search  2 & 3 Flute End Mills - 41° and 38° - ALUMASTAR® Coated - 110 Items

Ball End-Alumastar® Coated-142B

2 Flute - 41° - High Performance Ball End Mills - ALUMASTAR® Coated

(18)
  • Solid submicron grain carbide end mill - center cutting
  • Specific coating engineered to repel aluminum
  • Engineered to run at 750-2500 SFM (225-750 M/Min.)
  • High velocity - high metal removal rate
  • Need to use properly balanced holders
  • Holds perpendicularity
  • Flats can be added within 48 hours
  • Tolerance on ball radius is +.0000" -.0005" (+0.0000 / -0.0127)
242M

2 Flute High Performance End Mills - 45°

(45)
  • Solid submicron grain carbide end mill - center cutting
  • High performance machining
  • Rigid work holding, machine stability and part integrity are critical!
  • Excellent choice for slotting
  • Polished cylindrical O.D. margin reduces chatter
  • Recommended for aluminum and titanium (AlumaStar® coating recommended)
  • Sharp corners (Can be modified with a corner radius)
  • Designed for spindle speeds between 5,000 - 10,000 RPM, 1% diameter for chip load

Search  2 Flute High Performance End Mills - 45° - 45 Items

Die Mold Cutters-Balinit®X. CEED Coated-350MX

2 Flute - 15° - Die Mold Cutter End Mills - X.CEED Coated

(19)
  • Solid submicron grain carbide end mill - center cutting
  • High performance machining in the die mold industry
  • Rigid work holding, machine stability and part integrity are critical!
  • Carbide tested and selected for specific application
  • ≤5.0 (.1969") diameter have 5° taper to shank
  • Recommended for high Rockwell materials
  • Can be modified with a neck in 48 hours
  • Radius tolerance +0.0000" -0.0005" (+0.0000 / -0.0127)
[44mb - right-click and save to folder]
535 E. Ten Mile Rd.  •  Madison Heights, Michigan 48071-4204 USA  •  Site Map  •  Privacy Policy
Site created by ThomasNet Web Solutions, a division of ThomasNet.com